Cosen C-510MNC / 650MNC Automatic Mitre Bandsaw
Automatic single mitre bandsaws for mid to large sections
- 510 or 650 mm capacity
- 0–60° mitre
- NC programmable
The Cosen C-510MNC and C-650MNC are fully automatic single-mitre horizontal bandsaws. The saw head swivels forward to 60 degrees on a precision pivot, and material is fed by a hydraulic index vice under Cosen's Smart NC-100 control, so a run of angle cuts is programmed by length and quantity and cut automatically.
They suit structural fabricators and steel merchants cutting production quantities of angle, channel, tube and RHS to one mitre direction.
Key features
Mitre to 60 degrees on a precision pivot
The saw head swivels forward from 0 to 60 degrees on a large pivot with the angle read from a protractor and pointer in clear view of the operator. Angle changes are set and repeated without a trial cut.
Quick angle lock
The head is locked at the set angle with a single long lever. An angle change on a mixed job takes seconds rather than a spanner and a re-check.
Slotted discharge table
The discharge table is slotted at the common cutting angles and drains coolant back to the tank. Cut pieces sit flat at any mitre angle and coolant is not carried off the machine on the parts.
Smart NC-100 control with Mitsubishi PLC
The 5.7 inch HMI stores up to 100 jobs by length and quantity, compensates kerf loss automatically and displays blade speed, blade life and error codes. A cut list is entered once and runs automatically, and faults are read from the screen rather than traced.
Full stroke hydraulic front and index vice
Both the front vice and the index vice clamp through their full stroke under hydraulic control, so any material size in the capacity is held without repositioning a jaw. Size changes need no jaw repositioning.
Hydraulic blade tension
Blade tension is set and held hydraulically and monitored for breakage. Tension is correct on every start and the machine stops before a slack blade damages the cut or the guides.
Carbide and bearing blade guides
Bearing guides align the blade ahead of the carbide inserts, and the right-hand guide arm is adjustable for stability at larger mitre angles. Cut squareness holds at 60 degrees where the unsupported blade span is longest.
C-650MNC scissor frame
The larger C-650MNC carries the saw head on a hydraulic cylinder with a ball joint and a 5.5 kW blade motor on a 41 mm blade, cutting 380 x 650 mm at 90 degrees and 380 x 400 mm at 45. Structural sections that exceed the C-510MNC are cut on the same control and vice system.
Is the C-510MNC or C-650MNC right for your workshop?
The C-510MNC and C-650MNC are specified where mitre cuts in one direction run automatically from a job list. The choice between them comes down to section size, 330 x 510 mm or 380 x 650 mm at 90 degrees. Model is confirmed from sections and volume at quotation.
Get a quoteSpecifications
| Model | C-510MNC | C-650MNC |
|---|---|---|
| Round capacity at 90 degrees | 360 mm | 420 mm |
| Rectangular capacity at 90 degrees (H x W) | 330 x 510 mm | 380 x 650 mm |
| Round capacity at 45 degrees | 360 mm | 400 mm |
| Rectangular capacity at 45 degrees (H x W) | 330 x 330 mm | 380 x 400 mm |
| Round capacity at 60 degrees | 230 mm | 250 mm |
| Rectangular capacity at 60 degrees (H x W) | 230 x 230 mm | 380 x 250 mm |
| Mitre range | 0 to 60 degrees, forward | 0 to 60 degrees, forward |
| Blade speed | 20 to 100 m/min | 25 to 125 m/min |
| Blade size (L x W x T) | 4900 x 34 x 1.1 mm | 5300 x 41 x 1.3 mm |
| Blade motor | 3.7 kW (5 HP) | 5.5 kW (7.5 HP) |
| Hydraulic motor | 0.7 kW | 1.5 kW |
| Blade tension | Hydraulic | Hydraulic |
| Feed | Hydraulic index vice, NC automatic | Hydraulic index vice, NC automatic |
| Single index stroke | 503 mm | 503 mm |
| Multiple indexing | to 6500 mm | to 25 m |
| Workbed height | 783 mm | 750 mm |
| Weight | 2135 kg | 2878 kg |
| Floor space (L x W x H) | 3300 x 2750 x 2200 mm | 3650 x 3318 x 2317 mm |
Model and options are confirmed against the sections and cut list at quotation. IMS holds Cosen parts and bandsaw blades in Australia and services the machine with its own technicians.
Specifications are indicative and subject to change by the manufacturer without notice. Please confirm any figure critical to your application before ordering.
Gallery
Installed and Supported in Australia
IMS imports direct from the factory and looks after the machine from delivery on.
- Installation and commissioning by IMS technicians
- Operator training on site
- Spare parts and consumables held in Australia
- Service and breakdown support from factory-trained technicians
