AORE LCS Servo Cantilever Sheet Loading System
- Sheet size 3x1.5m or 4x2m
- Max sheet weight 750 kg
- 120 degrees
The LCS is a servo-driven cantilever loading system that picks sheet from the stack and places it on the laser table without operator guidance.
It suits regular production where faster handling is required without the footprint or cost of a storage system.
Key features
Picks and places the sheet for you
A vacuum frame lifts raw sheet from the stack and places it on the laser table. Vacuum pickup holds the sheet securely without scratching or bending it. Crane movements are removed from the cycle and manual lifting from the shift.
Timed to the laser's cycle
The servo system runs to the laser’s production cycle rather than to operator timing. The interval between one sheet finishing and the next starting is shortened and held consistent.
Rigid servo-driven frame
A high-strength cantilever frame with servo transmission controls travel and places the sheet in the same position on every cycle. Repeatability is maintained across multi-shift operation.
Loading arm, loading system, or storage tower?
The LCS sits between a manual cantilever arm and a full storage and loading system. Selection is determined by sheets per shift and the current loading method.
Talk to us about sheet loadingSpecifications
| Model | LCS 3015 | LCS 4020 |
|---|---|---|
| Sheet material | Carbon steel, stainless steel | Carbon steel, stainless steel |
| Max. sheet size | 3000 x 1500 mm | 4000 x 2000 mm |
| Min. sheet size | 1200 x 1000 mm | 1200 x 1000 mm |
| Max. sheet weight | 750 kg | 750 kg |
| Sheet thickness | 0.8 to 15 mm | 0.8 to 8 mm |
| Rotation | 120° (±60°) | 120° (±60°) |
Sheets up to 750 kg are handled. The build is confirmed against the heaviest sheet handled at quotation.
Specifications are indicative and subject to change by the manufacturer without notice. Please confirm any figure critical to your application before ordering.
Installed and Supported in Australia
IMS imports direct from the factory and looks after the machine from delivery on.
- Installation and commissioning by IMS technicians
- Operator training on site
- Spare parts and consumables held in Australia
- Service and breakdown support from factory-trained technicians
Fill in the form to download the brochure straight away. We'll email you a copy too.
About AORE
Fibre laser systems from one of the world's leading CNC laser manufacturers, backed by local support across Australia and New Zealand.
Official Australia and New Zealand agent for AORE high-power fibre laser cutting systems.
View all AORE machines →




