AORE CELL Series 3D Five-Axis Laser Cutting Cell

AORE CELL Series 3D Five-Axis Laser Cutting Cell

Fully enclosed 3D five-axis laser cutting cell with twin-station rotary table

  • Working range 3.1 x 2.2 m | 3D 5 axis cutting head 360° rotation, ±135° swing | Twin rotary table

The CELL Series is a fully enclosed five-axis laser cutting cell for holes, contours and trimmed edges on pressed, formed and fabricated components. The CELL3122 has a working travel of 3100 x 2200 x 680 mm, positioning accuracy of ±0.03 mm and a maximum running speed of 100 m/min.

A twin-station rotary table changes over in three seconds or less, so one part is loaded while the other is cut. Several manual trimming and drilling operations are replaced by one programmed process.

Key features

High-rigidity welded gantry bed

Overhead gantry with a main body integrally welded from high-strength steel plate. Rigidity and dynamic stability are maintained under high-load cutting at 1 G acceleration.

Five-axis simultaneous cutting head

A 3D cutting head with built-in optical path supports five-axis simultaneous movement, with continuous 360° rotation and ±135° swing. Complex curved surfaces and special-shaped components are cut without repositioning the part.

Twin-station rotary table

A dual-station rotary table changes stations in three seconds or less with positioning accuracy of ±15 arc seconds. Loading and unloading run concurrently with cutting, roughly doubling throughput against a single-station cell.

Full enclosure, dual light curtains and dust extraction

A fully enclosed cover with upper and lower safety light curtains separates the operator from the cutting zone, and a press-down, draw-below dual extraction system removes cutting fume at source.

Automatic focus to material thickness

The head selects the focal position for the material thickness automatically and holds focus continuously through the cut, including on curved and angled surfaces. Cut quality stays consistent without manual focus changes between parts.

Got formed parts you are still trimming by hand?

Five-axis cutting is specified where pressed or formed components require the same holes and trimmed edges in volume. The cell is configured from part drawings and annual quantities at quotation.

Talk to a laser specialist

Specifications

ModelCELL3122
Working travel (L x W x H)3100 x 2200 x 680 mm
Positioning accuracy±0.03 mm
A-axis travel (head swing)±135°
C-axis travel (head rotation)N x 360°, continuous
Maximum running speed100 m/min
Maximum acceleration1 G
StationsTwin rotary table, station change in 3 s or less
Rotary table positioning accuracy±15 arc seconds

The CELL3122 is the standard configuration. Fixturing is designed for each component family. Send us part drawings and annual quantities and we will confirm cycle times and the fixture layout.

Specifications are indicative and subject to change by the manufacturer without notice. Please confirm any figure critical to your application before ordering.

Video

Installed and Supported in Australia

IMS imports direct from the factory and looks after the machine from delivery on.

  • Installation and commissioning by IMS technicians
  • Operator training on site
  • Spare parts and consumables held in Australia
  • Service and breakdown support from factory-trained technicians

Fill in the form to download the brochure straight away. We'll email you a copy too.

Request a quote

Enquiring aboutAORE CELL Series 3D Five-Axis Laser Cutting Cell

About AORE

Fibre laser systems from one of the world's leading CNC laser manufacturers, backed by local support across Australia and New Zealand.

Official Australia and New Zealand agent for AORE high-power fibre laser cutting systems.

View all AORE machines →